Ultrafilter AK03/10 is an activated carbon adsorption precision filter element from the German ULTRAFILTER AK series, for 03/10 specification filter housings. It serves as the end-stage odor treatment component in compressed air purification systems, with a higher processing flow rate the AK03/05 model in the same series. Core Performance Parameters Filtration and Adsorption Capacity: Utilizing a composite structure of a 001μm precision microfiber pre-filtration layer and a high iodine value columnar activated carbon filling layer, it efficiently filters oil mist and microparticles from compressed air adsorbing volatile organic compounds (VOCs), odor molecules, and residual oil vapors. After filtration, the residual oil mist content is as low as 0.03PPM, and the removal efficiency for VOCs such as benzene and formaldehyde, as well as odors, exceeds 95%, meeting the ISO857-1 Class 0 air quality standard. Structural Design: Equipped with a 304 stainless steel skeleton, the entire filter element undergoes resin impregnation and curing, making it pressure-resistant, impact-resistant, and corrosion-resistant. The outer layer is fitted with a hydrophobic foam sleeve to prevent secondary carryover ofced liquids. The initial differential pressure is ≤0.02MPa, offering low airflow resistance. Under normal operating conditions, its service life is approximately 400-6000 hours (depending on specific conditions such as oil content and humidity of the air source). Once adsorption saturation is reached, the entire element must replaced and cannot be regenerated. Applicable Operating Conditions: The rated processing flow rate is 1.0 Nm³/min, which is 2.5 times of the AK03/05 (0.4 Nm³/min), making it suitable for medium-flow compressed air purification systems. The working pressure range is0.8-1.6MPa, and the working temperature covers -10°C to 80°C. It is typically installed after precision filtration such as PE/FF/MF/SMF, serving as the final deodorization stage in the air purification process