The Domnick Hunter K009ACS is a K009 series activated carbon filter element manufactured by Domnick Hunter in the UK. It is used for oil removal, deodorization, and particulate filtration at the end of compressed air systems, with an accuracy of ≤0.01μm and residual oil of ≤0.003ppm. Type: ACS (Activated Carbon Filter), used to adsorb oil vapor, hydrocarbons, and residual particles.
Filtration Accuracy: ≤0.01 microns, residual oil content ≤0.003 ppm
Flow Rate: Approximately 0.5 Nm³/min (depending on the specific installation housing)
Applicable Scenarios: Screw air compressor after-treatment systems in food, pharmaceutical, and electronics industries with high air quality requirements.
Structure: Stainless steel frame + fiberglass + activated carbon layer, engineering plastic end caps, interchangeable with the original (domestic alternatives are common).
Replacement Cycle: Typically 8–12 months (depending on operating conditions and humidity).
Note: K009ACS is an "AA grade + activated carbon" combination, not a purely mechanical filter; complete depressurization is required before installation to avoid accidents caused by residual pressure in the housing.