Core Technical Parameters
(Specification 48) Main Filter Media: Imported multi-layer glass fiber, filter paper, outer layer equipped with polyester sponge sleeve (for blocking oil mist).
Structural Material: Stainless steel inner and outer frame, high strength and corrosion resistance, avoiding secondary pollution. Reference Dimensions: Height approximately 820 mm, diameter approximately 83 mm.
Installation Method: Typically uses a pull rod type or flat connector with top and bottom end caps.
Purchase and Replacement Recommendations: Installation Sequence: The order must never be reversed in the pipeline.
Standard Configuration: Air Inflow: E9 → E7 → E5 → E3 → E1; Clean Air Outflow: Replacement cycle: Under normal industrial use, it is recommended to replace it every 6 months (or 4000-6000 hours of operation). If the differential pressure gauge pointer enters the red zone or the pressure drop exceeds 0.07 MPa, it must be replaced immediately.